Holosun 509T Footprint Optic Cut for CZ P07/P09

Description

This is a service to cut your CZ P07/P09 slide for a Holosun 509T pattern optic. The cut will be 0.210″ deep. Please note: The internals (extractor, firing pin, etc.) must be included on this slide, as we will need to shorten the extractor retaining pin after we cut the slide. We do not need the barrel or recoil spring. If the extractor is not included, you will be responsible for shortening it (to 0.400″) yourself.

Recommended Sights for Lower 1/3 Co-witness: Dawson Precision P09 0.205″ Front Sight / Glock 0.250″ Rear Sight. Please Note: CZ front sights can be difficult to remove if they are tight; if we need to remove your front sight, there is a chance it could get damaged.

IRON LOCATION: In order to fit the 509T footprint on this slide, it will be cut on top of your factory rear iron dovetail. You may choose to have a new dovetail (Glock size) milled in front of the optic. Due to space restrictions, we cannot mill a new dovetail behind the optic on this slide.

COATINGS: Three refinishing options are available. Cold blue is a chemical that reacts with bare steel and offers very little protection, but allows the refinishing of just the machined area rather the the full slide. The cerakote and nitride options are for the entire slide. We use H series oven cure cerakote and offer 5 colors. The black nitride is a OEM style metal heat treatment that improves surface hardness and gives the slide higher wear resistance compared to the cerakote.  Note that nitride lead times are not guaranteed and may take 3-4 weeks.

For detailed coating descriptions, please see our Coatings Explained Page: https://wagermachineworks.com/coating-options-explained/

THE PROCESS: Once you checkout with your chosen optic cut, you will receive an email with instructions on how to ship the slide to us. Please ship us your stripped slide only. We will complete the cut and/or refinishing and then ship the slide back to you quickly. You will receive an email once the slide has been shipped back to you.

TIMELINE: Once we receive your slide, we will complete the work in the stated turnaround time (Mon-Fri) or less and get it shipped back to you. This includes coating.

PLEASE NOTE: Your order will be returned to the address that you provide at checkout. Please follow instructions and include a copy of your confirmation email when you ship your slide to us; failure to follow this will result in increased turnaround time.