Holosun K Footprint Optic Cut for CZ P10

Description

This is a service to cut your CZ P10 slide for a Holosun K Footprint optic – Holosun 407k/507k/EPS carry/EPS and most RMSc optics. The cut will be 0.200″ deep. Please note: The internals (extractor, firing pin, etc.) must be included on this slide, as we will need to shorten the extractor retaining pin after we cut the slide. We do not need the barrel or recoil spring. If the extractor is not included, you will be responsible for shortening it yourself.

Please note due to the design of CZ iron sights, they may be damaged during the removal process. While this is rare, any damage caused during removal will not be at fault of WMW. If you are worried about your sights being damaged, please remove them prior to shipping the slide.

IRON LOCATION: The Holosun K footprint is small enough that it will allow the factory CZ iron dovetail to remain in place.

COATINGS: Three refinishing options are available. Cold blue is a chemical that reacts with bare steel and offers very little protection, but allows the refinishing of just the machined area rather the the full slide. The cerakote and nitride options are for the entire slide. We use H series oven cure cerakote and offer 5 colors. The black nitride is a OEM style metal heat treatment that improves surface hardness and gives the slide higher wear resistance compared to the cerakote.  Note that nitride lead times are not guaranteed and may take 3-4 weeks.

For detailed coating descriptions, please see our Coatings Explained Page: https://wagermachineworks.com/coating-options-explained/

THE PROCESS: Once you checkout with your chosen optic cut you will receive an email with instructions on how to ship the slide to us. Please ship us your stripped slide only. We will complete the cut and/or refinishing and then ship the slide back to you quickly! You will receive an email once the slide has been shipped back to you.

TIMELINE: Once we receive your slide, we will complete the work in the stated turnaround time (Mon-Fri) or less and get it shipped back to you. This includes coating.

PLEASE NOTE: Your order will be returned to the address that you provide at checkout. Please follow instructions and include a copy of your confirmation email when you ship your slide to us; failure to follow this will result in increased turnaround time.

DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by CZ. CZ does not warrant or represent that
this product is compatible with CZ pistols.