Description
This is a service to cut your CZ P07/P09 slide for a RMR pattern optic – RMR/SRO/RMRhd/RCR and Holosun 407c/507c/508t/507comp. The cut will be .125″ deep. The front bosses WILL be milled in to locate the optic as this is the way the optic was designed to be located and this ensures universal fitment for any optic that is in spec. The threaded holes will not break into any of the internal parts of the slide. The holes are threaded 6-32 and you will need 6-32 x 3/8 screws.
RMR screws will be included for free.
Recommended Sights for Lower 1/3 Co-witness: Dawson Precision P09 .260″ Front Sight / Glock .325″ Rear Sight. Please Note: CZ front sights can be difficult to remove if they are tight, if we need to remove your front sight, there is a chance it could get damaged.
IRON LOCATION: In order to fit the RMR footprint on this slide, it will be cut on top of your factory rear iron dovetail. You may choose to have a new dovetail (Glock size) milled in front of the optic. Due to space restrictions, we cannot mill a new dovetail behind the optic on this slide. Please note, if you opt to have the rear iron dovetail recut in front of the optic, this will not be compatible with optics like the Trijicon SRO and RMRhd due to how the optic overhangs forward of its footprint.
COATINGS: Three refinishing options are available. Cold blue is a chemical that reacts with bare steel and offers very little protection, but allows the refinishing of just the machined area rather the the full slide. The cerakote and nitride options are for the entire slide. We use H series oven cure cerakote and offer 5 colors. The black nitride is a OEM style metal heat treatment that improves surface hardness and gives the slide higher wear resistance compared to the cerakote. Note that nitride lead times are not guaranteed and may take 3-4 weeks.
For detailed coating descriptions, please see our Coatings Explained Page: https://wagermachineworks.com/coating-options-explained/
THE PROCESS: Once you checkout with your chosen optic cut you will receive an email with instructions on how to ship the slide to us. Please ship us your stripped slide only. We will complete the cut and/or refinishing and then ship the slide back to you quickly! You will receive an email once the slide has been shipped back to you.
TIMELINE: Once we receive your slide, we will complete the work in the stated turnaround time (Mon-Fri) or less and get it shipped back to you. This includes coating.
PLEASE NOTE: Your order will be returned to the address that you provide at checkout. Please follow instructions and include a copy of your confirmation email when you ship your slide to us, failure to follow this will result in increased turnaround time.
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by CZ. CZ does not warrant or represent that
this product is compatible with CZ pistols.
Ethan –
Had my P07 done, the work was exceptional, and the turn around time was insanely quick. These guys are awesome, super informative and the result was exactly what I wanted.
Th3m00se –
Fantastic work. Went with the black cerakote for the quicker turnaround and Wager didn’t disappoint. Very polite and answered all my questions as well.