Description
This is a service to cut your M&P 2.0 slide for a RMR pattern optic – Trijicon RMR/SRO/RMRhd/RCR and Holosun 407c/507c/508t/507comp. The cut will be 0.145″ deep. The front bosses WILL be milled in to locate the optic as this is the way the optic was designed to be located and this ensures universal fitment for any optic that is in spec. The threaded holes will not break into any of the internal parts of the slide. The holes are threaded 6-32 and you will need 6-32 x 3/8 screws. Please note: The internals (extractor, firing pin etc) must be included on this slide, as we will need to shorten the extractor retaining pin after we cut the slide. We do not need the barrel or recoil spring. If the extractor is not included, you will be responsible for shortening it yourself.
RMR screws will be included for free for Trijicon optics.
Recommended Sights for Lower 1/3 Co-witness: Angry Bear Arms Suppressor Height Sights – can be ordered on our iron sights page.
IRON LOCATION: Due to the size of the RMR footprint, it will be cut over the top of your factory iron sight dovetail. We will recut a Glock style dovetail behind the optic. At this time we do not offer the irons cut in front of the optic.
COATINGS: Two refinishing options are available. These slides are stainless steel so the cold blue finish will not work. The cerakote and nitride options are for the entire slide. We use H series oven cure cerakote and offer 5 colors. The black nitride is a OEM style metal heat treatment that improves surface hardness and gives the slide higher wear resistance compared to the cerakote. Note that nitride lead times are not guaranteed and may take 3-4 weeks.
For detailed coating descriptions, please see our Coatings Explained Page: https://wagermachineworks.com/coating-options-explained/
THE PROCESS: Once you checkout with your chosen optic cut you will receive an email with instructions on how to ship the slide to us. Please ship us your stripped slide only. We will complete the cut and/or refinishing and then ship the slide back to you quickly! You will receive an email once the slide has been shipped back to you.
TIMELINE: Once we receive your slide, we will complete the work in the stated turnaround time (Mon-Fri) or less and get it shipped back to you. This includes coating.
PLEASE NOTE: Your order will be returned to the address that you provide at checkout. Please follow instructions and include a copy of your confirmation email when you ship your slide to us, failure to follow this will result in increased turnaround time.
DISCLAIMER: This product is not manufactured, authorized, endorsed,
or warranted by Smith & Wesson. Smith & Wesson does not warrant or represent that
this product is compatible with Smith & Wesson pistols.
Stephen –
Couldn’t ask for a better job! My compact looks amazing now. Whole process took less than two weeks from the day I mailed it out.
Tim S –
Amazing work! I got this back so fast I couldn’t believe it!! I would of had to wait 12 weeks elsewhere. The fit and finish is amazing. And shooting with a red dot helped tighten my groups out to distance by a lot!
Ezra Lopez –
Top quality work. Cut is clean, optic sits perfectly on the slide. And of course, in typical Wager Machine Works fashion, extremely fast turnaround time and amazing customer service. Nate is a great guy
Dan –
I had the pleasure of meeting Nate locally to have a RMR cut completed. Solid guy doing quality work and providing customer service and turn around times that are above expectations amongst companies doing optic cuts. Highly recommended for quality work and quick turn around.
Christian –
Turn around time was great and the quality of the cut exceptional. If I had more pistols they would absolutely be sent here.
John R –
My second slide sent in and another fantastic job. RMR cut along with sights installed and everything came out great. Nate was also great in his email correspondence. Will be looking to send more in the future and highly recommend their work.