Description
This is a service to cut your factory Glock slide to allow direct mounting of an optic (aftermarket slides cut with prior approval). Factory optic ready slides cannot be cut unless specifically stated. We only offer cuts for the models listed on this page, if you have any questions or have a model not listed, please reach out [email protected]
Summary of this service:
- .125″ depth of cut
- Fits Trijicon RMRcc
- Mounts with standard 5-40 screws – provided with the optic, we do not provide them.
- On slimline Glocks, iron dovetail must be removed or relocated in front of the optic due to length of this footprint.
Recommended Sights for Lower 1/3 Co-witness: We recommend .310″ (rear)/ .305″ (front) irons for use with most optics with this cut. We do stock irons in this height and they are labeled as ‘OPTIC HEIGHT’ on our iron sight page.
IRON LOCATION: You can maintain factory dovetail placement, positioning the optic in front of the rear sight for standard width Glocks. We also offer an iron sight relocation service to move the optic cut to the rear, allowing for a recut dovetail in front of the optic (required on slimline Glocks 43/43x/48). We also offer racecut options that eliminate the dovetail completely and cut the optic in the rear position of the slide.
COATINGS: Three refinishing options are available. Cold blue is a chemical that reacts with bare steel and offers very little protection, but allows the refinishing of just the machined area rather the the full slide. The cerakote and nitride options are for the entire slide. We use H series oven cure cerakote and offer 5 colors. The black nitride is a OEM style metal heat treatment that improves surface hardness and gives the slide higher wear resistance compared to the cerakote. Note that nitride lead times are not guaranteed and may take 3-4 weeks.
For detailed coating descriptions, see our Coatings Explained Page: https://wagermachineworks.com/coating-options-explained/
THE PROCESS: After checkout, you will receive instructions for shipping your stripped slide to us (please remove the barrel and recoil spring unless you are also getting porting). We will perform the cut and/or refinishing and ship the slide back promptly. You will receive an email notification once we receive the slide (typically the day after it gets delivered to us) and a second email when it ships back to you with a tracking number.
TIMELINE: We will complete the work in the stated turnaround time (Mon-Fri) or less, including coating, after receiving your slide.
Note: Your order will be returned to the address provided at checkout. Follow instructions and include a copy of your confirmation email when shipping your slide to us to avoid increased turnaround time.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Miles –
Had a G17.3 slide Cerakoted to FDE and RMR cut. It came back looking and feeling great! The job was fast and well done, and the slide works well to this day. Not much more to say beyond that. You won’t be disappointed!
Vic F –
Specifically had my G19 G5 non-MOS milled for the RMRCC & cerakoted black. Phenomenal work & precision! RMRCC fits like it was factory manufactured, and the cerakote is incredibly uniform without any blemishes. 5-day turn-around was awesome & no complaints from me as they are finishing the move to new headquarters. I will complete any future work with WMW. Customer for life! Kudos, and God bless, my friends!
Josh t –
Eclxcellent service and quality, the work was done quickly and turn around time was great.
Definitely will use again in the future.